Home Services Reliability Test

Reliability Test

  1. Burn in for semicon, modules and system level
  2. PCB design and fabrication
  3. Pilot run of prototype
  4. Automotive parts testing
  5. Test system customization and development
  6. Failure Analysis with 3D CT Xray
  7. Electronic Cooling with
  8. Quality Assurance Verification
  9. Design Verification on Semicon
  10. CSAM
  11. FESEM
  12. XRAY-3D- by 2019 Dec
  13. Cross section
  14. Ionic Contamination
  15. FTIR
  16. Ion Chromatography
  17. High Accelerated Life Testing (HALT)
  18. Highly Accelerated Stress Screening (HASS)
  19. Characterization Test
  20. Xenon test
  21. Carbon arc test
  22. Sunshine test
  23. Power/Thermal Cycling Test
  24. Design Marginality Test
  25. Humidity Test
  26. Thermal Shock Test
  27. HASS screen development
  28. Prototype testing, component level testing
  29. Failure analysis and repair
  30. Salt Spray testing
  31. Life testing(long hour burn-in)/ELFR
  32. High Potential testing
  33. SEM
  34. Reflow and pre-con for MSL tests
  35. Solderability Test
  36. MTBF
  37. Production Burn-in
  38. Coplanity Check
  39. Tensile Check
  40. Push/Pull check
  41. Functional Test
  42. X-Ray
  43. Mechanical Shock
  44. Vibration
  45. ISTA transportation test
  46. Ionic Contamination
  47. HAST/uHAST
  48. Thermal shock
  49. Temperature cycling
  50. Temperature storage
  51. RTOL
  52. HTOL
  53. LTOL
  54. SIR
  55. Reflow simulation
  56. Pick and place
  57. Vaccum test
  58. Autoclave
  59. Tensile Test
  60. Compression Test
  61. Abrasion Test
  62. Color testing
  63. Glossness testing
  64. Mechanical Free Fall- Tumbler Test
  65. Viscosity Test
  66. ESD Test
  67. Latchup
  68. H2S Gas testing
  69. SO2 Gas testing
  70. Power Quality Test
  71. Transient Test
  72. Surge Test
  73. Power Magnetic Test
  74. Load dump
  75. Road vehicle electrical disturbance
  76. Road vehicles electrical loading
  77. SAE 575
  78. Conducted Emission
  79. IES LM79 testing
  80. IES LM80 Lumens maintenance
  81. IP Testing
  82. Luminaire safety testing
  83. Luminaire performance testing

Using fully or partially of the followings standard

  1. MIL-STD-202G, Test Method Standard, Electronic & Electrical Component Parts
    • Methods: 101D, 103B, 105C, 106F, 107G, 201A, 203C, 204D, 211A, 212A, 213B, 214A
  2. MIL-STD-781D, Reliability Testing for Engineering Development, Qualification & Production
    • Methods: Task 401
  3. MIL-STD-810G, Environmental Test Methods and Engineering Guidelines
    • Methods: 500.5, 501.5, 502.5, 503.5, 505.5, 506.5, 507.5, 509.5, 510.5, 513.6, 514.6, 516.6, 520.3
  4. MIL-STD-883H, Test Method Standard, Microcircuits
    • Methods: 1001, 1004.7, 1009.8, 1010.8, 1011.9, 2001.3, 2002.5, 2004.6, 2005.2, 2007.3, 2018.5
  5. UN38.3 Transportation Test
  6. IPC TM 650 Series Moisture Testing
  7. IEC 68000-2-1,2-2,2-6, 2-14 ,2-27, 2-30, 2-32, 2-43, 2-60, 2-64,2-67, 2-78 Standard Basic Environmental Test
  8. JIS C0092, H8620 Standard Basic Environmental Test
  9. JESD22-A101D, A103E, A104E, A105C, A106B, A108D, A119A, A110E, A102E , 201A
  10. IEC 61000 series 4-2, 4-4, 4-5, 4-9, 4-10, 4-11 EMC Compliance
  11. ISTA 1A,2A, 3A Transportation Test
  12. ANSI C136.31 Transportation Test
  13. IEC 60529 - IPcode
  14. ASTM B117 Standards Method of Salt Spray (Fog) Testing
  15. AEC Q005, Q100, Q101, Q102, Q200B Automotive Electronic Component Test
  16. SAE 400, 455, 575 series Automotive Electronic Component Test
  17. MIL-STD-883G/202F
    • Component testing and reliability confirmation eg capacitors, resistors and etc
  18. IEC 68000-1
    • Climatic testing for electronic product eg from cold -55C to hot temperature of 150C
  19. IEC 68000-2
    • Vibration and transportation testing for electronic product
  20. IEC 61000-4
    • EMC publication
  21. IES NA LM79-2008
    • Photometric test for LED module and luminaires
  22. IES NA LM80-2008
    • Performance test for LED Modules and Luminaires
  23. LED  Performance and Safety Test
    • IEC/PAS 62612 (Edition1.0 2009-06)
    • IEC 62560 (2011)
    • IEC 60838-2-2 (2008 )
    • IEC 60598-1 (2006 )
    • IEC 62031 (Edition 1.0 2008-01)
    • IEC 61347-2-13 (1st Edition 2006-05)
    • IEC/PAS 62722-2-1 (2011)
    • IEC/PAS 62722-1 (2011)
    • IEC 61347-1 (2003)
    • IEC/PAS 62717 (2011)
    • IEC 62384 (1st Edition 2006-08)